|
|
Post by dl4raj on Dec 29, 2007 18:57:55 GMT -5
Bob,
is there a specification for maximum allowed reverse power
without damaging the analyzer?
73
Clemens
DL4RAJ
|
|
|
|
Post by Bob on Dec 29, 2007 19:55:28 GMT -5
Bob, is there a specification for maximum allowed reverse power without damaging the analyzer? 73 Clemens DL4RAJ Hi Clemens, The max safe input is 2 volts peak (approx +16dbm) The input is DC coupled, so the 2 volt max applies to the DC level too. Be sure the ground of the antenna is at the same potential as the ground of the PC. The max difference in ground potential is 1 volt. -- Bob |
|
