k9fv
New Member
Posts: 37
|
Post by k9fv on Feb 24, 2011 13:38:24 GMT -5
Hello all, This AIM4170 is an incredible instrument.
For measuring loss thru a barrel connector or switch, would measuring the loss in each peice of coax (say 20 ft of RG-58?), then connect the two peices of coax together thru the barrel connector or coax switch - then measure the total loss.
coax A + coax B + switch = total loss.
Would this all work to determine the loss of the switch? OR would the numbers be so small to be meanless?
Thank you for any help,
73 de Ken H>
|
|