Post by hank7hp on May 23, 2010 22:10:06 GMT -5
When I measure S11 port A to port B with just a thru wire then add a ferrite bead on the thru wire and try to use swap graphs to display the two conditions, I am unable to retrieve both sets of marker data to print . It only allows me to see the first set- regardless of which graph I am swapped to.
This does not happen when measuring S21 with port B scanand rescan.
Maybe this was fixed later but am having problems with 440a.
This does not happen when measuring S21 with port B scanand rescan.
Maybe this was fixed later but am having problems with 440a.