Burt
Junior Member
Posts: 51
|
Post by Burt on Sept 21, 2009 22:44:27 GMT -5
When I left mouse click on the cursor line on the graph it will stay put as long as I hold the left mouse button down. It will stay put as long as I don't move the mouse. If I move the mouse at all, the cursor line will jump to it. If I position the cursor line where I want it then click and hold the mouse and drag the mouse off screen, the cursor line will stay put once I put the mouse back onto the graph. Is this normal or am I missing something?
Thanks,
Burt
|
|
w0qe
Junior Member
Posts: 67
|
Post by w0qe on Sept 21, 2009 23:20:25 GMT -5
Burt,
Click on Help, Edit Config File and change the line that starts as "1 Cursor ena:" to "0 Cursor Ena". After making the change you will need to close and restart the program.
This will fix your problem. I always run with this value as 0. However some folks like the cursor to operate the default way Bob has programmed it (value = 1). If you like the new behavior you will need to change it every time you download a new version of the software.
73, Larry W0QE
|
|
Burt
Junior Member
Posts: 51
|
Post by Burt on Sept 22, 2009 11:06:16 GMT -5
Larry,
Thanks, that did the trick. On the desktop, I like it with the setting at zero. We'll see how it works in the field with the laptop and the need to hold the left button while using the touch pad. For me, I think this will work fine.
I'm using the Power AIM-120 and it amazes and delights me as to how user friendly the program is.
Burt, K6OQK
|
|
