Finer data readout

[kc0ws]

Is it possible to read out the measurement points from the data instead of the data points on the graph? The mouse and the left-right keys seem to read out each pixel on the graph. On data sweeps where I take 1000 or more points, it would be nice to be able to read out the actual measurement points in the data area on the right side. If there is no facility to do this currently, could I suggest that perhaps using something like shift-Left and shift-Right could switch to the actual sweep measurement frequencies?

KC0WS

[Bob]

The frequency readout now is at 1 pixel increments. If you have a wide screen monitor, you can specify a wider graph display in the config file to get more pixels per scan. The width/height specification is also handy for making the display smaller for use with the new 9 or 10 inch netbook computers.

The Zplots program by AC6LA (under the Utilities tab) processes all the raw data and it can be used to display a subset of the scan data to effectively zoom-in.

-- 73/Bob