g3rep
New Member
Posts: 6
|
Post by g3rep on Mar 2, 2018 5:46:06 GMT -5
AIM4170 with software AIM910. In the past I have been able to print (using the "save .bmp") the Horizontal and Vertical grid line as seen on the screen display.
Recently this grid has disappeared from my prints and I am unable to ascertain how to toggle it back on.
Grateful for help how to locate it.
73s & Many Thanks Bob G3REP
|
|
g3rep
New Member
Posts: 6
|
Post by g3rep on Mar 2, 2018 6:47:58 GMT -5
Further to my post the problem is partly of my own making, but the following may be of help! Realising I had updated my printer since my earlier plots steered me in the right direction.
The "Band Highlight" colouration is overpowering the colour/depth of the gridlines during printing. Tweaking the print qualities of the printer does slightly make a difference but it is not the real answer.
This is evident when using a sweep wider than the "Band Highlight" so the main way of overcoming it is to actually turn the highlight off. Alternatively the ability to increase the density of the grid lines or reduce the depth of the "Band Highlight" facility would help.
Many Thanks Bob G3REP
|
|
|
Post by Bob on Apr 3, 2018 21:25:03 GMT -5
Hi Bob, You can set the highlight color in the Config File. Look for this line: 230,230,255 // highlight color for the ham frequency bands on graph
Larger colors are closer to white (lighter background)
--73/Bob
|
|