AIM4170C STANDARD CALIBRATION PROBLEM

[kepen1967]

Hi All,

I have a problem when making standard calibration by using OSL N-VNA2180.
The Standard Calibration process is always stop while calibrating.
I am using ver 865A.

Whats wrong with my AIM 4170C ?

Your help, highly appreciated.

Thanks and regards,
'73 YC0KPN

Attachments:

result1.bmp (364.79 KB)

result2.bmp (392.63 KB)

result3.bmp (364.79 KB)

[Bob]

What error message is displayed when the cal process stops?
If the computer hangs up, it may be a communication problem.
Be sure your usb adapter uses the FTDI chip. That is much more reliable than other usb chips.

Try running the AIM4170C on another computer to verify the AIM hardware is ok.

You can email me directly with more details if you want to.

--73/Bob

[kepen1967]

Hi Bob ,

I have uploaded the attachment files.

Thanks and regards,
'73 YC0KPN

[kepen1967]

Hi Bob,

The problem had been solved, since I used windows XP.
I used Windows 7 before.

Thanks and regards,
'73/YC0KPN