Post by lolo on Mar 1, 2022 8:31:37 GMT -5
Hello, I am looking to control my AIM4300 directly through commands sent with the RS232 interface with my own software.
I found this document: www.w5big.com/AIM_ProgrammersGuide082708.pdf
Unfortunately some AIM4170 commands seem to be obsolete for AIM4300, in particular the one allowing to program the frequencies and to read the measurements!
Can anyone here help me?
I found this document: www.w5big.com/AIM_ProgrammersGuide082708.pdf
Unfortunately some AIM4170 commands seem to be obsolete for AIM4300, in particular the one allowing to program the frequencies and to read the measurements!
Can anyone here help me?