calibration standards

n9fyx New Member Posts: 9	calibration standards Apr 30, 2010 20:54:33 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by n9fyx on Apr 30, 2010 20:54:33 GMT -5 I lost my calibration standards for my AIM with the bnc input. Are they available, or could I make them by just using 2 100 ohm 1/8w resistors in parallel and the other with 2 200 ohm resistors? Steve

Bob Administrator Posts: 511	calibration standards Apr 30, 2010 21:28:09 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Bob on Apr 30, 2010 21:28:09 GMT -5 Hi Steve, The connector that is used for these cal standards is Mouser part number 171-9311. You can also get film resistors from Mouser. -- 73/Bob