n2lee
New Member
Posts: 10
|
Post by n2lee on Apr 26, 2015 11:54:20 GMT -5
Bob, I notice that when I run a sweep on an antenna, the top of the window displays all frequencies where the phase angle crosses zero. (as described in the manual)
"At the top of the graph in the main window, up to five resonant frequencies of the antenna are displayed. These are the frequencies where the phase angle passes through zero. "
My first question ... is there anyway to only display those frequencies that are below the SWR Ruler or Scales SWR Setting ?
The suggestion for future versions would be to allow Automatic Labels of those frequencies that are the best/lowest SWR point. If you can't do this how about allowing the frequency to be displayed where I put a marker ?
Thanks for all of your hard work !
Lee
|
|