Post by s59zb on Sept 28, 2014 18:20:09 GMT -5
Hi Bob,
I have a problem when making calibration using ver. 880A on my AIM4170.
The Calibration process is always stoped with raport:
"Cal Aborted error=78121 There is no reference signal from the AIM at: 0.005MHz. Cal Aborted."
Ver 865A works fine.
Can You help me?
73 Zvone
I have a problem when making calibration using ver. 880A on my AIM4170.
The Calibration process is always stoped with raport:
"Cal Aborted error=78121 There is no reference signal from the AIM at: 0.005MHz. Cal Aborted."
Ver 865A works fine.
Can You help me?
73 Zvone
Attachments:
